SynLube™ Lube−4−Life^® 1−800−SYN−LUBE

Synthetic Antifreeze - Coolant

Home | What's New | Contact Us | How to Order | PRICE LIST | Sitemap | FAQ | LINKS

Products | Motor Oil | ATF | Gear Oil | PSF | Grease | Coolant | Oil Filters | Magnets | Brake Fluid

100% SYNTHETIC COOLANT SYSTEM

This system of coolant products includes:

• Synthetic Prediluted 50% Coolant Antifreeze
  • a 50/50 mixture of coolant and synthetic water
• Synthetic 100% Coolant Antifreeze
  • a concentrate intended for freeze point adjustment
• Coolant Life Extender
  • a prescribed additive system recharge package
• Cooling System Flush
  • a prescribed cooling system heavy duty flushing fluid
• Cooling System Cleaner
  • a prescribed cooling system heavy duty cleaner (powder)
• Ultra Pure Double Distilled Water
  • a prescribed cooling system normal duty flushing fluid
• Synthetic Water
  • a prescribed cooling system dillution fluid
• Cooling System Sealant
  • a prescribed cooling system sealant (powder)

SynLube™ Cool-4-Life™ Synthetic 100% Coolant Antifreeze is a single-phase, ethylene glycol type heavy duty engine coolant based on patented carboxylate corrosion inhibitor system with nitrite.

SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant Antifreeze is a 50/50 mixture of
SynLube™ Cool-4-Life™ Synthetic 100% Coolant Antifreeze with ultra pure Synthetic Water.

SynLube™ Cool-4-Life™ Synthetic Coolant Life Extender is the prescribed additive package recharge for SynLube™ Cool-4-Life™ Synthetic Coolant Antifreeze

Recommended Use

It is recommended that only SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant Antifreeze be used for initial fill and top-off

Use SynLube™ Cool-4-Life™ Synthetic 100% Coolant Antifreeze only if should you need to adjust the freeze point as required by ambient conditions.

Product Application

SynLube™ Cool-4-Life™ Synthetic Coolant System is a heavy duty engine coolant system which incorporates a patented carboxylate inhibitor technology.

SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant Antifreeze meets ASTM D 4656 and D 5345.

When properly utilized SynLube™ Cool-4-Life™ Synthetic Coolant Antifreeze meets both ASTM D 3306 for automotive service and ASTM D 4985 for heavy duty diesel service. This is a, nitrate-, borate-, phosphate-, silicate-, and amine-free formulation which uses a patented carboxylate technology to provide maximum protection of the six basic metal alloys found in most heat transfer systems. Since the coolant contains no phosphates or silicates, hard water deposits in the cooling system are reduced. Water pump seal wear is reduced as a result of fewer abrasive dissolved solids in SynLube™ Cool-4-Life™ Synthetic Coolant Antifreeze which results in improved water pump seal life.

The patented carboxylate technology in SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant Antifreeze has been shown to remain above 80% of their original concentration after 300,000 miles of on-road use
(three years or 6,000 hours of off-highway use) in heavy duty diesels without the addition of supplemental coolant additives.

Note:

These products are not to be used to protect the inside of potable water systems against freezing.

Product Description and Features

SynLube™ Cool-4-Life™ Synthetic Coolant Antifreeze is manufactured from 100% pure ethylene glycol and a highly effective, Synthetic corrosion inhibitor package.
This inhibitor system eliminates the need for silicates, phosphates, borates, nitrates, and amine additives traditionally used for this purpose.

SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant Antifreeze is a 50/50 mixture of SynLube™ Cool-4-Life™ Synthetic 100% Coolant Antifreeze and of "Synthetic Water" for freeze protection down to minus 34°F (-36.7°C) and boil over protection to 265°F (129°C) with a 15 lb. pressure cap.

This product does not need any precharging or recharging for 300,000 miles of on-road use (three years or 6,000 hours of off-highway use). After 300,000 miles, simply add SynLube™ Coolant Life Extender and SynLube™ Cool-4-Life™ Synthetic Coolant Antifreeze is good for another 300,000 miles of on-road use (three years or 6,000 hours of off-highway use).
SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant Antifreeze is compatible with other traditional silicate antifreezes, but the long life service benefits will be reduced if mixed.

SynLube™ Cool-4-Life™ Coolant Life Extender is the only prescribed recharge for SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant Antifreeze and it has been specifically formulated to double the life of SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant Antifreeze It should only be added at 300,000 miles of on-road use
(three years or 6,000 hours of off-highway use) in heavy duty commercial engines to restore protection against scale buildup, corrosion, cavitation erosion, and pitting of wet sleeve liners. Use of this product at the specified interval is necessary to ensure maximum coolant life of 600,000 miles of on-road use (six years or 12,000 hours of off-highway use).

After 600,000 miles of on-road use (six years or 12,000 hours of off-highway use), simply drain your system and fill with a fresh charge of SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant Antifreeze The 600,000 mile service interval could be further extended, but laboratory analysis of the coolant would be required.
It is recommended that coolant be changed at least every ten years and is disposed of properly.

Do not add traditional coolants or SCAs to SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant Antifreeze , since doing so will reduce the products' long service life benefits

SynLube™ Cool-4-Life™ Coolant Life Extender is not recommended for use with the initial fill of SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant Antifreeze , as no benefit will be gained by overdosing the additive package.

Benefits

• 300,000 miles on-road use (three years or 6,000 hours off-highway use)on initial fill
  
  
• Additional 300,000 miles on-road use (three years or 6,000 hours off-highway use) by adding SynLube™ Cool-4-Life™ Coolant Life Extender
  
  
• Easy maintenance
  
  
• No inhibitor level testing required
  
  
• Excellent pitting protection for wet sleeve cylinder liners
  
  
• Effective, long term corrosion protection for aluminum, brass, cast iron, steel, solder, and copper
  
  
• Improved water pump seal life due to reduced water pump seal wear resulting from fewer dissolved solids
  
  
• No silicate dropout or gel formation during use or storage
  
  
• Excellent heat transfer
  
  
• Reduced hard water scale
  
  
• Superior protection in high operating temperatures
  
  
• Protects against winter freeze up and minimizes the chance of summer boil over
  
  
• Outstanding hot surface aluminum protection
  
  
• Suitable for gasoline powered automotive and industrial engines
  
  
• 100% biodegradable in its pure unused form
  
  
• Compatible with conventional antifreeze. Dilution with conventional antifreeze will reduce long life benefits
  
  
• SynLube Incorporated recommends that this product is not diluted by more than 10% with conventional coolants
  
  

Product Recommendations and Approvals

SynLube™ Cool-4-Life™ Synthetic Coolant System is recommended for all heavy duty and natural gas engines including Caterpillar, Navistar, Cummins, Detroit Diesel, Mack, MTU, and other original equipment manufacturers (OEMs).

SynLube™ Cool-4-Life™ Synthetic Coolant System is especially recommended for use in the cooling systems of all types of industrial internal combustion engines including systems containing large amounts of aluminum alloys.

SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant Antifreeze meets or exceeds:

• ASTM D 4656 for automotive service
• ASTM D 5345 for heavy duty diesel service

SynLube™ Cool-4-Life™ Synthetic 100% Coolant Antifreeze
(for freeze point adjustment only) meets or exceeds the requirements:

• ASTM D 3306 for automotive service
• ASTM D 4985 for heavy duty diesel service
• TMC RP 329

SynLube™ Cool-4-Life™ Synthetic Coolant System meets:

• Phosphate free requirement of European OEMs
• Silicate free requirement of Japanese OEMs
• Caterpillar EC-1
• Navistar B1, Type 3

ASTM D 1384 Glassware Corrosion Test

Weight loss in milligrams per coupon, negative indicates net gain

Product Maintenance

Traditional phosphate and borate containing coolants exhibit high pH and reserve alkalinity (RA) when compared with SynLube™ Cool-4-Life™ Synthetic Coolant Antifreeze
SynLube™ Cool-4-Life™ Synthetic Coolant's unique corrosion inhibitor system is designed to protect aluminum and other system metals at lower pH levels than conventional coolants.
A comparison of SynLube™ Cool-4-Life™ Synthetic Coolant Antifreeze versus traditional coolants is shown below.

The above comparison should not be used to draw conclusions about the relative corrosion protection of SynLube™ Cool-4-Life™ Synthetic Coolant Antifreeze versus conventional coolants.

RA (reserved alkalinity) is defined as the amount in milliliters (ml), of 0.1 normal hydrochloric acid required to reduce the pH of 10 ml of antifreeze to 5.5. Since RA is based upon the buffering curve of inhibitors which are not present in SynLube™ Cool-4-Life™ Synthetic Coolant Antifreeze we suggests that it is more important that initial pH value does not change drastically during service interval versus using RA as a corrosion protection indicator.

The American Society for Testing Materials (ASTM) has recently eliminated RA level requirements in both key antifreeze specifications: ASTM D3306 for automotive engines and ASTM D4985 for heavy duty engines. This action by the ASTM acknowledges that coolants which are not based on phosphate and borate can provide excellent corrosion protection for cooling system metals.

Boiling and Freeze Protection

SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant/Antifreeze

SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant/Antifreeze should be used as manufactured. No further dilution is recommended.

Because SynLube™ Cool-4-Life™® Synthetic 100% Coolant Antifreeze and SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant/Antifreeze is silicate free, it can be stored at least 8 years with no problem, providing that the container integrity is maintained.

Always dispose of used coolant in accordance with local, state and federal guidelines.

Typical Characteristics

SynLube™ Cool-4-Life™ Synthetic 100% Coolant Antifreeze

For maximum protection against freezing in extremely cold areas, a 60% solution can be used.
Adjust SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant/Antifreeze by the table amounts with SynLube™ Cool-4-Life™ Synthetic 100% Coolant Antifreeze for freeze protection to -59°F (-50.6°C).

Concentrations greater than 67% or less than 40% are not recommended.

Freeze Point Adjustments as Required by Ambient Conditions

SynLube™ Cool-4-Life™ Coolant Life Extender

SynLube™ Cool-4-Life™ Coolant Life Extender has been specially formulated to double the life of
SynLube™ Cool-4-Life™ Synthetic Prediluted 50% Coolant/Antifreeze
It should only be added after 300,000 miles of on-road use
(three years or 6,000 hours of off-highway use).

SynLube™ Cool-4-Life™ Coolant Life Extender needed @ 300,000 miles of on-road use
(three years or 6,000 hours of off-highway use)

SynLube™ Cool-4-Life™ Coolant Life Extender should only be used with
SynLube™ Cool-4-Life™ Synthetic Coolant Antifreeze.

Handling Practices

SynLube Incorporated recommends thoroughly flushing (twice) your system with distilled water if you have been using conventional coolants before you install END W3C Validator SynLube™ Cool-4-Life™ Synthetic Coolant Antifreeze

SynLube Incorporated does not recommend commercial flushes, but if significant deposits are visible use a SynLube™ Cool-4-Life™ Cooling System Flush Follow the engine manufacturer's flushing procedure and dispose of properly. Be sure to flush the system thoroughly with distilled water twice afterwards.

When changing SynLube™ Cool-4-Life™ Synthetic Coolant Antifreeze , flush with distilled water only.

Do not use commercial flushes. In the event that a commercial flush is inadvertently used, completely flush the cooling system at minium twice with distilled water ONLY.

The primary limiting factor in the shelf life of a coolant is silicate instability. Since silicate will eventually polymerize to silicate gel, all traditional silicate-based coolants have a shelf life of about 12 to 18 months.
SynLube™ Cool-4-Life™ Synthetic Coolant System is silicate-free and, therefore, can be stored for extended periods (up to 8 years) provided the integrity of the container is maintained.

Pricing

*) U.S. Retail Price includes FREE shipping by FedEx Ground Service or by USPS Priority Mail.

**Retail Pricing DOES NOT include Handling FEE (Handling is $5.00 per order ) The FLAT Handling Fee covers the cost of packaging (shipping boxes) and of order and Credit Card processing

CANADA: FREE shipping by USPS Priority Mail on orders of $200.00 or more.

Europe, Asia, Australia, South America FREE shipping by USPS Economy Air Parcel on orders of $250.00 or more.
Typical delivery time 7 to 15 days.

Home | Up | Motor Oil | ATF | Gear Oil | PSF | Grease | Coolant | Oil Filters | Magnets | Brake Fluid | Gauges | Tools | Specials | Sale Items